Panasonic NV-FJ720 - Manual (Page 9)

9
Example:
If you want to delete Channel 6,
1
Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (34) S
to select [CH ADD&DELETE] then
press the OK button T.
3 Press the Cursor buttons (34) S
to select the desired programme
position (example CH3) then press
the Cursor button (2) S to select
[DELETE].
– Deleting a channel shifts the programme positions of
Channel 8 to Channel 12 down, as shown in the list
above.
– The list of the programme positions do not appear on
the On Screen Display.
– Repeat step 3 for each of the other programme
positions.
4 Press the MENU button U twice to exit the On Screen
Display.
END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT: END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT: END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT: END: MENU
CH ADD&DELETE
CH 3
ADD: DELETE:
CH SELECT:
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
SELECT
END : , OK
:MENU
SELECT
END : , OK
:MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
MENU
SELECT
END : , OK
:MENU
SELECT
END : , OK
:MENU
On Screen Display
1
2
3
4
5
6
7
8
2
4
6
8
10
12
–
–
1
2
3
4
5
6
7
8
2
4
–
6
8
10
12
–
Programme
Position
Channel
Programme
Position
Channel
1
2
3
4
5
6
7
8
2
4
6
8
10
12
–
–
1
2
3
4
5
6
7
8
2
4
8
10
12
–
–
–
Programme
Position
Channel
Programme
Position
Channel
To Add and Delete the Channel
Example:
If you want to add a new channel between Channel 4 and
Channel 6,
1
Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (34) S
to select [CH ADD&DELETE] then
press the OK button T.
3 Press the Cursor buttons (34) S
to select the desired programme
position (example CH3) then press
the Cursor button (1) S to select
[ADD].
– Adding a channel shifts the programme positions of
Channel 6 to Channel 12 up, as shown in the list
above.
– The list of the programme positions do not appear on
the On Screen Display.
4 After adding, tune the added channel. (See steps 3– 7 in
Manual Tuning on page 8.)
– Press the MENU button U twice and repeat steps 3–4
for each of the other programme positions.
5 Press the MENU button U four times to exit the On
Screen Display.