Pentax Optio Digital Camera 43WR - Manual (Page 24)

22
1
Getting Started
Initial Settings
If the Initial Settings screen appears when you turn the camera on, follow
the procedures on the pages indicated below to configure initial settings.
[If the Initial Settings screen appears]
1p.22-25 “Setting the Display Language”, “Setting the Home Town”
“Setting the D.S.T. Mode”, “Setting the Date and Time”
[If the Date and Time Settings screen appears]
1p.24 “Setting the Date and Time”
You can choose the language in which the menus, error messages, etc.
are displayed from the following: English, French, German, Spanish,
Italian, Russian, Chinese (traditional and simplified) and Japanese.
1
Turn the camera on.
2
Use the four-way controller (45) to
select the display language.
The default setting is English.
3
Press the four-way controller (3).
The screen for setting the City will be
displayed.
If the above screens do not appear, there is no need to configure initial settings.
Setting the Display Language
You can change the setting after it has been made. Refer to “Changing
the Display Language” (p.102).
Power switch
MENU button
OK button
Four-way controller
NYC
English Language/
City
DST
Initial Settings
OK OK Exit MENU
00_Optio43WR-E.book Page 22 Tuesday, April 6, 2004 4:40 PM