Pentax Optio Digital Camera 43WR - Manual (Page 52)

50
4
T
aking
Pictu
res
Taking Pictures
In Program mode (e), you can set all the functions and take pictures.
1
Press the four-way controller (3) in Capture mode.
The Virtual mode dial is displayed.
2
Press the four-way controller (45)
to select [e].
3
Press the OK button.
The camera is ready to take the picture.
4
Set the functions you want to use.
See “Setting the Capture Functions” (p.36-
p.49) for instructions.
5
Lightly Press (Halfway) the Shutter Release Button.
When the subject is in focus, the LCD monitor’s focus frame turns
green.
6
Press the shutter release button down fully.
The picture is taken.
Program Mode
Taking Still Pictures 1p.26
Four-way controller
OK button
Shutter release button
OK OK
SNAP
00_Optio43WR-E.book Page 50 Tuesday, April 6, 2004 4:40 PM