Panasonic KX-FLB751AL - Manual (Page 50)

50
Setup (PC)
1 Start Windows 95/98/Me/2000 and
close all other applications.
● You must be logged in as an
administrator in Windows 2000.
2 Insert the included CD-ROM into your
CD-ROM drive.
● The [Choose Setup Language]
dialogue box will appear. Select the
desired language that you want to use
with this software from the drop-down
list. Click [OK]. The installation will
automatically start.
● If the [Choose Setup Language]
dialogue box does not appear:
The installation will automatically
start.
● If the installation does not start
automatically:
Click [Start]. Choose [Run...]. Type
“d:\setup” (where “d:” is the drive letter
of your CD-ROM drive). Click [OK].
(If you are not sure what the drive
letter is for your CD-ROM drive, use
Windows Explorer and look for the
CD-ROM drive.)
The installation will start.
● The following dialogue box will
appear. Click [Cancel] to close it.
● The screens shown in these
instructions are from Windows Me.
● The screens may differ slightly from
those of the actual product.
● The screens are subject to change
for improvement without notice.
Installing Multi-Function Station software !
To uninstall the software
1. Click [Start].
2. Point to [Settings], then click [Control Panel].
3. Double-click [Add/Remove Programs].
4. Select [Panasonic Multi-Function Station]
from the list.
5. Click [Add/Remove...] (Windows 95/98/Me) /
[Change/Remove...] (Windows 2000), then
follow the instructions on the screen.
3 Follow the instructions on the screen
until all files have been installed.
● Readiris OCR software can also be
installed. For details about OCR
software, see page 55.
● If the fax machine is not connected to
your computer, the [Port Selection]
dialogue box will appear. Select the
port number that you want to use. If
the fax machine is connected to your
computer, the port number will be
automatically detected.