Panasonic KX-FLB751AL - Manual (Page 60)

To send a document:
1. Insert the document into the auto
document feeder.
2. Follow steps 1 and 2 above.
3. Press
+ or - to select “ON”.
4. Press w .
5. Enter the fax number.
6. Press
w .
7. Enter the transmission start time.
Press
*
to select “AM” or “PM”.
8. Press w .
9. Press p .
● To cancel after programming,
press
{ then w .
Features Summary
60
How to set the advanced features
Programming table
Code
#22
Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[±]
ON
OFF
After transmission, this feature will
turn off automatically.
● This feature is not available for
broadcast transmission.
● The calling charge may be higher.
#23
Sending document overseas
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
OVERSEAS MODE
=OFF
[±]
Feature & Display Settings How the unit operates
#25
Sending a fax at a specific time
This feature allows you to take
advantage of low-cost calling
hours offered by your telephone
company.
● The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
=OFF
[±]
ON
OFF
ON
OFF
Advanced features !
“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 33).
Note:
● Step 3 may be slightly different depending on the
feature.
● See page 57 for more details.
1. Press
p
.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press
+
or
-
until the desired setting is
displayed.
4. Press w .
5. Press
p
.
For the settings column, the bold type indicates the default setting.