Philips CF-30FTSAZAM - Manual (Page 23)

7-2
7.1.3. Removing the HDD
1. Remove the Screw. <K1-16>
2. Remove the 4 Screws. <K1-17>
And remove the SATA Guard.
3. Release the 2 Tabs, and remove the HDD U Case Ass'y
and the HDD L Case Ass'y.
4. Remove the HDD Dumper Ass'y.
5. Remove the Sheet.
6. Remove the Heater and the Heater Ins Sheet.
7. Remove the HDD FPC.
Screws <K1-16>: DFHE5025XA
Screws <K1-17>: DRQT2+E8FKL
7.1.4. Removing the KB Cover, Hinge
Cover L, Hinge Cover R and Key-
board
1. Remove the 4 Screws <N6>, and remove the KB Cover.
2. Remove the 2 Screws <N2> and the 3 Screws <N6>, and
remove the Hinge Cover L,R.
3. Remove the Keyboard.
Screws <N2>: DRHM5054XA
Screws <N6>: DRQT26+E4FKL
HDD U Case Ass'y
HDD FPC
Heater Ins Sheet
HDD L
Case Ass'y
HDD
Sheet
<K1-17> <K1-17>
<K1-16>
SATA Guard
Heater
HDD
Damper
Ass'y
<N6>
<N6>
<N6>
<N6>
<N6>
<N2>
<N2>
<N6>
<N6>
KB Cover
Hinge Cover L
Hinge
Cover R
Keyboard
<N6>
Bluetooth PCB