Philips PV-GS55 User Manual

Page 67

Advertising
background image

Others

-67-

≥Operate the [OFF/ON] switch or Mode Dial
≥Insert or eject a cassette

ª Playing Back

Repeat Playback
If you continue to press the [

1] Button for

5 seconds or longer, the Palmcorder switches to
Repeat Playback Mode, and the [R

!] Indication

appears. (To cancel Repeat Playback Mode, set
the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the
playback sound, set [AV JACK] to
[OUT/PHONES] and connect the headphones to
the [PHONES] Jack (

-13-

) on the Palmcorder. In

this case, no sound (including warning and
shutter sounds) will be reproduced through the
built-in speaker of the Palmcorder.
Choosing Sound during Playback
You can select the sound by using the
[AUDIO OUT] setting on the [PLAYBACK]
Sub-Menu.
STEREO:

Stereo Sound (main sound and sub
sound)

L:

Left channel sound (main sound)

R:

Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit]

selected as the [AUDIO REC] on the
[RECORDING] Sub-Menu, playback sound
becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to
[MIX].

ª Index Search Functions

≥Index Search may not be possible at the

beginning of the tape.

≥Scene Index Search may not function properly if

the interval between 2 scene index signals is
less than 1 minute.

ª Playback Zoom Function

≥You cannot adjust the sound volume with the

Remote Controller in Playback Zoom Mode.

≥If you turn off the Palmcorder power or if you

operate the Mode Dial, Playback Zoom Mode is
automatically cancelled.

≥Even if Playback Zoom Functions are being

used, images that are output from the DV
Terminal (

-13-

) are not enlarged.

≥As you enlarge an image, the quality of the

image deteriorates.

≥During a Playback Zoom, the Variable Speed

Search Function cannot be changed with the
Remote Controller.

ª Playback Digital Effect Functions

≥Signals of images to which digital effects are

added during playback cannot be output from
the DV Terminal (

-13-

).

≥You cannot use the Wipe or Mix Function while

playing back the non-recorded portion of tape.

ª Playing Back a Card

≥If a blank (nothing recorded) Card is played, the

screen becomes white.

≥If you attempt to play back a file recorded in a

different format or if file data is defective, the
whole display becomes bluish and the
[UNPLAYABLE CARD] Indication may appear
as warning.

≥When playing back a picture recorded on other

equipment, its size and that of this Palmcorder
may appear differently.

≥When playing back a picture recorded on other

equipment, the picture may not be played back
or the quality of pictures may be deteriorated.

≥When playing back a non standardized file, the

Folder File Number may not be displayed.

≥In the following cases, black bars may appear,

depending on the playback device.

≥When playing back a mega-pixel still-picture

with this Palmcorder and recording it onto a
tape

≥Changing the picture size to 640k480 pixels

with DV STUDIO

≥The file format supported by this Palmcorder is

ASF. (Not all the ASF formatted files will be
played back.)

≥When you set [SCREEN] on the [DIGITAL]

Sub-Menu to [NORMAL] in playing back
MPEG4 moving pictures, they are displayed
smaller. This is not a malfunction.

≥Moving pictures are kept still during

Cue/Review playback. Only the counter number
increases or decreases.

≥MPEG4 data cannot perform, Slow Motion

Playback (forward direction and reverse
direction), Still Advance Playback (forward
direction and reverse direction) or Playback with
Zoom Lever.

≥If you try to play back an MPEG4-recorded

image for which the [MPEG4 MODE] was set to
a mode other than [ECONOMY] on other
PANASONIC cameras, this image will not be
displayed, and the indication [PLEASE
RE-OPERATE AFTER PUSHING RESET
BUTTON], etc., may appear. This is not a
malfunction.

≥For the MPEG4 moving pictures recorded on

other equipment, [UNPLAYABLE CARD]
Indication may be displayed when they are
played back. If the [

1] Button is pressed in this

case, [

!] will be displayed for a few seconds

and the next image will be displayed.

≥The MPEG4 data cannot be output from the DV

Terminal.

PV-GS55PP_Eng.book 67 ページ 2004年2月10日 火曜日 午前11時51分

Advertising