Panasonic UF-490 - Manual (Page 51)

Sending Documents
51
Voice Mode Transmission
Basic
O
p
era
ti
o
n
s
On-Hook Dialing
For On-Hook Dialing, follow the steps below.
NOTE 1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
1
Set document(s) face down.
DOCUMENT SET
2
You will hear dial tone through the monitor speaker.
ENTER TEL NO.
3 Dial the telephone number from the Keypad.
Ex:
5551234
❚
4 When you hear a beep,
5 5 5 1 2 3 4
PAUSE
TONE