Philips PET737/58 User Manual

Quick start guide, 3 open here, Charge your battery

Advertising
background image

TV

AUDIO IN

VIDEO IN

This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.

1 Slide the POWER switch to the OFF

position (charging of the DVD player only
possible in the power-off mode).

2 Connect the supplied power adaptor cord (or

the car adaptor) to the player and AC mains (or
the car cigarette lighter outlet) to start charging.

➜ The CHG indicator turns red.

➜ When the battery is fully charged, the

indicator turns off.

3 Disconnect the power adaptor cord (or the car

adaptor) when the CHG indicator turns off.

Charge your battery

1

Quick start guide

Philips Portable DVD Player PET737

3 OPEN HERE

1 Open the lid of the player.
2 Slide the POWER switch to ON to switch

on the DVD player.

➜ The POWER indicator turns on.

2

Enjoy (Disc operation)

Note:
– Once the battery is fully discharged, immediately

recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the
battery life.When the power is low, the battery
icon will be shown on the upper-right corner of the
TFT for warning.

3

Enjoy (AV OUT)

Connecting additional equipment (TV for
example)

1 Connect the AV OUT socket on the set to the

video and audio sockets on a TV as shown directly.

2 Switch on the TV and set to the correct

video-in channel.

➜ You can consult the owner's manual of your

TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
RF modulator. Please consult your dealer.)

Printed in China PDCC-XP-0845

White

Red
Yellow

Not supplied

1 Connect the DVD player to the antenna as

shown.

2 In TV mode, press MENU.
3 Press

1, 2 to switch to PAL I.

4 In the TV menu, when AUTO SEARCH is

highlighted, press OK on the remote (

2; on

the set).

➜ “AUTO SEARCH” is displayed.

➜ All available TV channels will be auto

searched and stored.

5 To stop searching, press MENU.

4

Enjoy (TV)

For details, see user manual.

3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and load a

disc with the label side facing up.

5 Close the disc door. Playback will start

automatically. If not, press

2;.

6 To stop playback, press

9.

QSG_PET737_Eng.qxd 2008.11.5 16:59 Page 1

Advertising