Pioneer PDP-501MX - Manual (Page 28)

28
3.4.2 Hanging on the wall
Carefully read the following before attempting to mount the unit on a wall, and observe the various limitations specified
below. Be sure to mount the unit so that twisting, bending or any other deformation of the unit does not exceed 1 mm.
Avoid blocking or covering this
area on the upper and lower sides. 104mm
48mm
A
104mm
Shaded areas ( ) indicate attachment
points for mounting hardware.
88mm
Special Installation (Hanging from wall)
* Operating Temperature Restrictions
• Ambient temperature, regardless of clearance A: 0 to 40 °C (or 0 to 35 °C when the PDP-S02-LR speaker system
is installed)
* Operating Temperature Restrictions for Upside-down Installations
• Ambient temperature, regardless of clearance A: 0 to 30 °C
NOTE: Different temperature restrictions apply to the PDK-5006. Refer to 4.5 Tiltable Plasma Display Mount Hardware.
In wall-mounting installation, allow adequate space (a clearance of 300 mm or more) above and below the
monitor set, as well as on the right and left.