Panasonic PT-DW7000E/E-K - Manual (Page 6)

Weights and dimensions shown are approximate. Specifications are subject to
change without notice. Product availability differs depending on region and
country. This product may be subject to export control regulations. UHM is a
trademark of Matsushita Electric Industrial Co., Ltd. Digital Light Processing,
DLP, DLP logo and the DLP medallion are trademarks of Texas Instruments.
VGA and XGA are trademarks of International Business Machines Corporation.
All other trademarks are the property of their respective trademark owners.
Projection images simulated.
PT-DW7000E1-04SEP46K Printed in Japan.
Dimensions
(8-1/4˝)
( Ø 1-9/16˝)
(1-5/16˝) (18-3/16˝) (1-5/16˝)
(20-7/8˝)
(4-15/16˝)
(7-1/2˝) (10-3/8˝)
(18-7/16˝) (1-1/4˝)
(1/16˝)
(22-3/8˝) (21-1/4˝)
(1-1/8˝)
(7-7/8˝) (6-11/16˝)
(4-3/8˝)
(1-3/4˝)
(3-13/16˝)
(1/4˝)
Unit: mm (inches)
Specifications
System
Device
Pixels
Lamp
Brightness
Contrast ratio
Resolution
RGB
Video
Lens
Screen size
RGB input scanning
frequency
Component signal
Video signal
Terminals
VIDEO IN
VIDEO OUT
S-Video IN
RGB1/YP
B P R IN
RGB2 IN
Optional board slot
RS-232C/422 IN
RS-232C/422 OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
Optical axis shift*
Keystone correction range
Installation
Power cord length
Power supply
Power consumption
Dimensions (W x H x D)
Weight
Operating temperature
Operating humidity
Supplied accessories
DLP™ system
0.85˝ (diagonal) DMD™ (x 3), 16:9
1,049,088 (1,366 x 768) x 3
300 W UHM™ lamp x 2 (BriteOptic™
Dual Lamp System)
6000 lumens (dual lamp)
3000 lumens (single lamp)
4000:1 (full white/full black, with
dynamic iris set to “3”)
1366 x 768 pixels
560 TV lines
Optional
70˝– 600˝ diagonal
f H 15 –100 kHz, f V 24 –120 Hz,
Dot clock 20–162 MHz
480i, 576i, 480p, 576p, 720/60p,
1035/60i, 1080/60i,1080/50i,
1080/25p, 1080/24p, 1080/24sF,
1080/30p
NTSC, PAL, SECAM, M-NTSC, PAL60,
PAL-M, PAL-N
BNC
BNC
Mini DIN 4-pin
BNC x 5
D-sub HD 15-pin
x 1
D-sub 9-pin female
D-sub 9-pin male
M3 jack
M3 jack
D-sub 9-pin female (parallel)
Powered; horizontal ±30%, vertical
±65%
±40° (with ET-D75LE2)
Front/rear, ceiling/floor, (menu selec-
tion)
2.5 m (8.2´)
220–240 V AC, 50/60 Hz
800 W (800 VA) (15 W during standby
mode with fan stopped)
530 x 200 x 540 mm
(20-7/8˝ x 7-7/8˝ x 21-9/32˝) (without
lens and lens hood)
22.0 kg/48.5 lbs (without lens)
0°– 40°C (32°–104°F)
0°– 35°C (32°– 95°F) (dual lamp,
lamp power: high)
10% – 80% (no condensation)
Optional accessories
• Replacement lamp unit (single): ET-LAD7700
• Replacement lamp unit (set of two lamps):
ET-LAD7700W
• Replacement long-life lamp unit (single): ET-LAD7700L
• Replacement long-life lamp unit (set of two lamps):
ET-LAD7700WL
• Ceiling mount bracket: ET-PKD75
• Low ceiling mount bracket: ET-PKD75S
• Dual stacking mount bracket: ET-DFD75
• Carrying handle: ET-HAD75
• Zoom lens (1.5–2.0:1): ET-D75LE1
• Zoom lens (2.0–3.0:1): ET-D75LE2
• Zoom lens (3.0–5.0:1): ET-D75LE3
• Zoom lens (5.0–8.0:1): ET-D75LE4
• Zoom lens (8.0–15.0:1): ET-D75LE8
• Fixed focus lens (0.8:1): ET-D75LE5
• DVI board: ET-MD75DV
• Network board: ET-MD75NT
• Video/S-Video input board: ET-MD95VM2
• SDI (480i/576i) input board: ET-MD95SD1
• SDI (480i/576i/480p) input board: ET-MD95SD2
• SDI (720p/1035i/1080i/1080-24p) input board:
ET-MD95SD3
• RGB/YP B P R input board: ET-MD95RGB
• Wireless mouse receiver: ET-RMRC2
• Wireless/wired remote control unit
• Batteries for remote control unit
• Remote control cable
• Power cord
N O T E S O N U S E
• The projector uses a high-voltage mercury lamp that con-
tains high internal pressure. This lamp may break, emitting
a large sound, or fail to illuminate, due to impact or extend-
ed use. The length of time that it takes for the lamp to
break or fail to illuminate varies greatly depending on indi-
vidual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with
use.
• The replacement cycle of the lamp will be shortened if the
power is frequently turned on and off or the projector is
subjected to daily continuous use for 10 or more hours.
Lamp mode/brightness
No. of lamp
Dual
Single
Lamp power
High
Low
High
Low
Brightness
Normal lamp
6,000 lm
4,800 lm
3,000 lm
2,400 lm
Long-life lamp
–
3,000 lm
–
1,500 lm
Lamp mode/lamp life
Lamp mode
High
Low
Lamp life
Normal lamp
1,500 hr
2,000 hr
Long-life lamp
–
4,000 hr
• Using the long-life lamps, lamp life is 8,000 hours
maximum when operated in single lamp mode with
the lamp relay function on.
• Lamp life varies depending on usage conditions and
the surrounding environment.
• When the long-life lamps are used the lamp power
mode is automatically set to low.
* Shift range is limited during simultaneous horizontal
and vertical shifting.