Figure 1, Step 1 – ParaBody Leg Press 100101 User Manual
Page 4
Advertising
4
FIGURE 1
STEP 1:
• SECURELY assemble the REAR TUBE (3) to the BASE FRAME (1) using two 3/8 X 3” BOLTS (25), four 3/8” FLAT WASHERS
(17), and two 3/8” LOCK NUTS (19). See FIGURE 1.
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
• Attach two 2” SQ. COVER CAPS (15) onto the ends of the REAR TUBE (3) as shown in FIGURE 1.
• Insert four 2” SQ. ENDCAPS (13) into the ends of the BASE FRAME (1) as shown in FIGURE 1.
3/8 X 3” 25
13
1
15
19
17
3
Advertising