Panasonic AJ-SDC915 - Manual (Page 104)

– 104 –
Recording With an External VTR Instead of the Internal VTR
Using the 26-pin/12-pin Output Adaptor
Connections
The method of connecting the external VTR is the same as that described in “Recording Simulta-
neously with the Internal VTR and an External VTR”.
Á See “Connections” on page 101.
Mounting the 26-pin/12-pin output adaptor
Á
Consult your local dealer when mounting the adaptor.
1
Set the unit’s internal switches.
1 Remove the side panel on the display window side.
2 Remove the printed circuit board holder, and take out the CAM ENC (2) printed circuit
board.
3 Set SW201 to the ON side.
4 Take out the SYNC (3) printed circuit board.
5
Set SW1 (26PIN) to the ON side.
6
To set the audio level to
p
20 dB, set the SW4701 DIP switch accordingly.
CAM ENC (2) Printed Circuit Board
Printed Circuit
Board Holder
CAM ENC (2) Printed Circuit Board
ON
SW4701
Pin No.
1
2
3
4
5
6
p 60 dB
(default p 20 dB
setting)
Not used
ON (NR ON/OFF)
ON OFF
OFF ON
ON OFF
OFF ON
1
2
3
4
5
6
SONY
SW1
N
SW201 ON OFF
MII