Pioneer DVR-450H-S - Manual (Page 117)

The Initial Setup menu
117
En
14
Additional information about the
TV system settings
About the input line system
This recorder is compatible with PAL,
SECAM, 3.58 NTSC and PAL-60 TV systems.
The Input Line System and Input Colour
System settings determine how the recorder
treats incoming video signals from an
external input or the built-in TV tuner.
Please note the following points when
changing the input line system:
• If, when the Input Line System setting is
changed, the screen goes blank (due to
incompatibility with your TV), you can
switch back by pressing and holding the
front panel
(Stop) button then
pressing INPUT SELECT (also front
panel) while the recorder is stopped.
• When you switch the Input Line System
setting the Copy List is erased. If you
switch the setting using the
(Stop)
button and INPUT SELECT buttons as
described above, there is no
confirmation, so please use with care.
• You can’t mix recordings of different TV
line systems on the same disc.
• When you change this setting, the Input
Colour System setting also changes
(page 117).
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
About the input colour system
The available options of the Input Colour
System setting depend on the Input Line
System setting. The tables below show the
different options available.
Input Line
System NTSC on PAL
TV
Output
when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Taiwan and Philippines model:
Input Line
System
Built-in tuner
External
input
625 System n/a Auto
PAL
SECAM
525 System 3.58 NTSC Auto
3.58 NTSC
PAL–60
DVR650HS_TLT_EN.book 117 ページ ２００７年３月２０日 火曜日 午後１２時１９分