Pioneer DVR-450H-S - Manual (Page 45)

Recording
45
En
05
Editing a timer programme
You can change any of the settings in a timer
programme before the recording is due to
start.
1 Press TIMER REC.
2 Highlight the timer programme you
want to change
....
3 Press then select ‘Modify’ from the
command menu panel.
Alternatively, press ENTER .
The Timer Programme Set screen appears
from which you can edit the settings.
4 Edit the timer recording settings as
necessary.
5 Select ‘Store Programme’ to finish.
Confirm the settings you made from the
following screen.
Deleting a timer programme
You can delete timer programmes you no
longer need.
1 Press TIMER REC.
2 Highlight the timer programme you
want to erase ....
3 Press then select ‘Erase’ from the
command menu panel.
• Select Yes to confirm or No to cancel.
• You can also just press CLEAR when the
timer programme is highlighted.
Skipping a regular timer
programme
If you’ve set a regular daily or weekly timer
programme, you can set the recorder to skip
the next scheduled recording.
1 Press TIMER REC.
2 Highlight the timer programme you
want to skip ....
3 Press then select ‘Cancel Once’
from the command menu panel.
• In the timer programme list, Cancel
Once appears by the programme.
• You can also just press PAUSE when
the timer programme is highlighted.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time in two different ways.
This can be useful if a broadcast programme
overruns, for example.
Cancelling or extending the timer
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been cancelled.
2 Press repeatedly to extend
recording in 30 minute blocks.
Programming a new end time
You can edit the end time of a timer
recording you have previously set.
1 Press TIMER REC.
2 Highlight the timer recording
you want to change.
3 Press then select ‘Modify’
from the command menu panel.
Alternatively, press ENTER .
The Timer Programme Set screen appears,
from which you can edit the settings.
4 Edit the end time as necessary.
You can also edit the Extend time parameter.
REC
ì
REC
ì
ENTER
ENTER
DVR650HS_TLT_EN.book 45 ページ ２００７年３月２０日 火曜日 午後１２時１９分