Planar PL1500M - Manual (Page 16)

13
OSD Display sub-menu
To adjust the OSD H and V, positions you should follow the steps below:
1.
Press the Select button to display the OSD Main Menu.
2.
Press the UP (△) or Down (▽) button to move to the OSD Display icon in the
OSD Main Menu, and press the Select button.
3.
The screen displays two items for adjustment: H. Position and V. Position.
a.
Press the Up (△) or Down (▽) button to move the desired item and press
the Select button.
b. Press the Up (△) or Down (▽) button to change the setting value in the
adjustment bar.
c.
After changing the setting value, press the Select button to accept the
adjustment.
4.
After the adjustment, select EXIT to go back to the OSD Main Menu.