Planar PL1500M User Manual
Page 23
20
D.
The message “Signal Out of Range” appears on my screen.
This message appears when the input signal is beyond the monitor's capability.
Set your computer to a supported video mode, preferably 1024 x 768 at 60 Hz.
See “Video Modes” on page 17.
E.
The image is very unstable.
1.
Set your computer to a supported video mode, preferably 1024 x 768 at 60
Hz. See “Video Modes” on page 17.
2.
Restore the original factory settings by selecting Factory Recall in the OSD
Factory Recall sub-menu.
3.
Perform the Auto setup function. See “Performing Auto setup by Direct
Key” on page 15.
Note:
Even if your computer’s setting is out of the range of video modes that
are supported by your monitor, it may still be displayed with reduced
quality. This provides you with an opportunity to change your
computer’s setting to a correct one.