Prima MAGICARD ID Card Printer - Manual (Page 12)

Ultra Electronics Card Systems
Magicard Prima Driver Manual 12
3.2 K AND PEEL OFF PANEL
3.2.1 INTRODUCTION
In this tab you can define the kind of extraction methods for placing different objects
to the K plane. You can define inclusion areas for peel-off (for front and reverse
separately), this can be done as a single or in combination setting.
3.2.2 DEFAULT
SETTINGS
3.2.3
SELECTION OF TEXT OBJECTS TO PRINT ON K-PLANE
By enabling of “Text” you can specify if the whole text or black text only shall be
printed on the K plane.