Panasonic DMR-EX85 - Manual (Page 14)

14
RQT8388
STEP
1
Connection
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Select the connection pattern that matches your environment from pattern A–B. Confirm connections not listed below with your
dealer.
Make sure to use the pair of supplied RF coaxial cables
Use the pair of supplied RF coaxial cables only when you make connections to the unit through its RF IN and RF OUT terminals. Striping may
appear and disrupt images on the TV if you use different cables for connection.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off
[approx. 2 W (Power Save mode)]
When “Power Save” is set to “On”, the “Quick Start” function does not work.
This unit is a DVD recorder with an integrated DVB tuner. This means that you can receive and record both analogue and terrestrial digital
channels without having to connect an additional DVB receiving unit (set-top box).
A Connecting a television
AC IN OPTICAL OPTICAL
DIGITAL AUDIO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM) (PCM/BITSTREAM) S VIDEO S VIDEO VIDEO VIDEO R-AUDIO-L R-AUDIO-L
AV4 INA V 4 I N
OUTO U T
AV2(EXT)
AV1(TV)
P R P B Y
COMPONENT VIDEO OUT COMPONENT VIDEO OUT
RF RF
IN IN
RF RF
OUT
OUT
4 3
2 1
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO IN
AV OUT
To the aerial
Television’s rear panel
Aerial cable
RF coaxial cable
(included)
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
Cooling fan
RF coaxial
cable
(included)
Red White Yellow
Red White Yellow
Audio/Video cable
(included)
Other connections
(
➡ 16, 17)
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB
output on this unit.
[Required]setting]
“AV1 Output” in the Setup menu (
➡ 63)
Connecting to a VCR with 21-pin Scart terminal
You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.
[Required]setting]
“AV2 Input” in the Setup menu (
➡ 63)
EH65.book Page 14 Friday, September 1, 2006 9:46 AM