Panasonic DMR-EX85 - Manual (Page 64)

64
RQT8388
Changing the unit’s settings
Refer to the control reference on page 60.
Tabs Menus Options (Underlined items are the factory presets.)
Others Remote Control ( ➡ 20) ≥DVD 1 ≥DVD 2 ≥DVD 3
Clock ( ➡ 67)
Power Save
≥Refer to the following when “Power Save” is set to “On”.
–“FL Display” is automatically set to “Automatic” ( ➡ 62).
–The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
≥If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.
≥On: Power consumption is minimized when the unit is turned
to standby ( ➡ 78).
≥Off
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
§ after turning it on. You
can start recording soon after deciding you want to record
something.
§ Only when recording to the HDD or DVD-RAM.
≥If this is set to “On”, “Power Save” is automatically turned to
“Off”.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
≥On
≥Off:
Standby power consumption is less than when this is
set to “On”.
DivX Registration ≥You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content ( ➡ 35).
System Update
In order to update this unit and support system changes made
by broadcasts, this unit periodically performs software updates.
≥Press [ENTER] to show the following settings. ≥Update data is sent by an unscheduled digital broadcast. In
order to receive these updates, you must be able to receive
digital broadcasts.
≥An update will take approximately 30 minutes. While the
update is in progress, “SW-DL” appears on the unit’s display.
You cannot operate the unit until the update is complete.
Removing the AC mains lead while the update is in progress
may damage the unit.
Software Update in Standby ≥On: You can perform the unit updates automatically when the
power is turned off.
≥Off
Software Search Period
Selects the time to perform updates automatically when the
power is turned off. This can only be set when “Software
Update in Standby” is set to “On”.
≥If there is a programmed recording set for the time you
have selected, the programmed recording will be given
priority.
≥Automatic: The unit will give priority to searching for update
data at midnight.
≥02:00–06:00
≥06:00–10:00
≥10:00–14:00
≥14:00–18:00
≥18:00–22:00
≥22:00–02:00
Software Update Search Now
The unit will begin searching for update data. ≥If applicable update data is found, press [2, 1] to select “Yes”
and press [ENTER].
Initialize
≥Press [ENTER] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password
and time settings return to the factory preset. The timer
recording programmes are also cancelled. ≥Yes
≥No
Default Settings
All the settings other than the programmed channels, time
settings, disc language settings, ratings level, ratings
password, remote control code, return to the factory presets. ≥Yes
≥No
EH65.book Page 64 Friday, September 1, 2006 9:46 AM