Panasonic EB-TX310 - Manual (Page 31)

Chapter 3
Everyday Operations 19
Speed Dial
To call a Speed Dial number directly from standby (without going to a
menu), enter the memory location number that contains the phone number
you want to call, and press
.
Note: If Emergency Call is set to On (see “Emergency Call” on
page 57) and you press
and , the emergency number
911 will be called.
To view a Speed Dial number before placing the call, follow these steps:
1
From standby, enter the memory location number that contains the
phone number you want to call, then press
. (For example, to dial
a number stored in location 25, press .)
• If the entered memory location is empty, the
display shows the entered digits and the # sign.
Press
briefly to return to standby.
2 Scroll to the Speed Dial number (or to another number in that location)
and press
to place the call.
Answering Calls
The phone must be on to receive calls. It will not ring or vibrate when
powered off.
When a call is received, the phone rings and/or vibrates.
• If you have Caller ID, the caller’s phone number is
displayed under Incoming Call.
• If the caller’s phone number matches an entry in
the Phonebook, the corresponding name appears
and the backlight changes color (unless the call
was placed through a PBX).
1 To answer, press or any key except . (See “Answer Key
Options” on page 22.)
• Quickly pressing will stop the ringing and/or vibration alert, but not
answer the call.
2 When you are ready to end the call, press to disconnect.