Polycom IP3000 - Manual (Page 8)

SoundStation IP 3
000
Installation Instructions and User’
s Guide
4
The call is listed with any
other ongoing calls that
may be displayed.
1 Press the Phone key and listen for
a dial tone. (Your call status LED’s
light green.)
2 Enter the number (or IP address)
of the party you would like to call.
3 Press the Dial soft key.
Using the SoundStation IP 3000
Placing a Call
Your call status LED’s will blink green as
the incoming call rings. Press the Phone
key or the Answer soft key.
Press the Phone key or the End Call
soft key.
While on a call, press the Hold soft
key. (Your call status LED’s light red to
indicate that the call is on hold.)
To return to the held call,
press the Resume soft key.
Answering a Call
Ending a Call
Placing a Call On Hold and Resuming It
Placing Additional Calls
If your ongoing call(s) are on hold,
you can place an additional call,
and then switch among them.
With your ongoing call(s) on hold,
press the New Call soft key,
then dial the number.
If multiple calls are ongoing, you can
choose which one to resume (although
you can not converse with more than
one at a time).
1 Place your current call on hold.
The held call is listed with any other
ongoing calls that may be displayed.
2 Press the Up or Down scroll key to
highlight the call you wish to resume.
3 Press the Resume soft key.
Switching Among Calls
Phone Key