Toggling on/off over-the-air subscription, Setting the range, Ending subscription – Plantronics WO200 User Manual

Page 16: Setting default line to desk phone or pc, Subscription button indicator light, Desk phone and pc talk buttons indicator lights, Desk phone and pc talk buttons “rules to live by

Advertising
background image

Plantronics Savi User Guide

16

toggling On/Off Over-the-Air Subscription

The Savi Office system ships with the over-the-air subscription
enabled. You can toggle on or off over-the-air subscription using
the subscription button on the base. With the master headset

undocked

and the system idle, press the subscription button for

three seconds. The subscription button will flash green for four
seconds if over-the-air subscription is on and red for four seconds
if off.

Setting the Range

With the master headset

docked

and the system idle, press the

subscription button for three seconds. Both the desk phone and
the PC talk buttons will flash green for high range. If you press
the subscription button again for three seconds, the talk buttons
will flash yellow for medium range. If you press the subscription
button again for three seconds, the talk buttons will flash red for
low range.

ending Subscription

If the base is in subscription mode (secure or over-the-air), and
you want to end the base from searching for a headset, press the
subscription button again. The subscription light will turn solid red
for four seconds and then go to it’s previous state.

Setting Default Line to Desk Phone or PC

The Savi Office system ships with the desk phone as the default
outbound line. This means any call initiated from the headset
with the call control button will open desk phone audio. You can
change your default outbound line from the base talk buttons.

While the system is in idle mode, press and hold the PC talk
button or the desk phone talk button for three seconds to
select that device as your default outbound line. The talk button
indicator light will flash green for four seconds confirming the new
setting.

Indicator Light

PC Talk Button

Desk Phone
Talk Button

Indicator Light

Master headset subscribed to base

Solid green

Base in master subscribing mode

Flashes red and green

Base conferencing in additional guest
headset(s)

Flashes yellow and
green

Active conference call with guest
headsets subscribed to base

Solid yellow

Subscription Button Indicator Light

No active audio link

Off

Incoming call

Flashes green

Active audio link

Solid green

Master headset muted

Solid red

Call on-hold

Flashes red

Seeking Audio Link*

Solid yellow

Desk Phone and PC talk Buttons

Indicator Lights

*When bringing up a link from the base, the talk button will be
solid yellow until a link is established. This could take up to several
seconds especially for wideband audio and/or when in moderate
to high density environments. If you press the talk button when
the indicator light is yellow, it will terminate the search for an audio
link.

Button (Indicator Light) State

If Button Is Pressed

Off

Solid green

Flashing green

Solid green

Solid green

Off

Solid red

Solid green

Flashing red

Solid green

Desk Phone and PC talk Buttons

“Rules to Live By”

NOte

If in any state, you hold down both the PC and desk

phone talk buttons for 1½ seconds both indicator lights will turn
solid green and the audio from both devices will be mixed.

Advertising