Panasonic PT-AE1000U - Manual (Page 25)

Remote control operation
E NGLISH - 25
Basic Op
eratio
n
You can adjust the focus and zoom of the
projected image. Press the LENS button to display the LENS control menu. See "LENS
CONTROL Menu" on page 37.
You can switch the preset picture mode
settings by pressing the PIC. MODE
button. Press the button until the required
setting is selected. See "PICTURE MODE"
on page 31.
You can display one of the PICTURE or
ADVANCED menu items by pressing the
PICTURE ADJUSTMENT button. Press
the button to switch between PICTURE
and ADVANCED menu. Press F G to
select the required menu item and I H to
adjust.
Q PICTURE menu items
PICTURE MODE, CONTRAST, BRIGHTNESS,
COLOR, TINT, SHARPNESS, COLOR
TEMPERATURE and DYNAMIC IRIS
Q ADVANCED menu items
GAMMA, CONTRAST, BRIGHTNESS, NR,
MPEG NR, CINEMA REALITY and TV-SYSTEM
You can switch off the POWER
automatically by setting the SLEEP
feature. Press the SLEEP button several
times to cycle through the duration of time.
See "SLEEP" on page 39.
You can access saved settings instantly.
See "MEMORY LOAD" on page 33.
1.Select the required setting from
MEMORY1 - 5.
Undefined setting will not be displayed.
2. Press ENTER to activate the selected setting.
Adjusting the focus and zoom
Switching the picture mode
CINEMA3
CINEMA2
CINEMA1
NORMAL
DYNAMIC
COLOR1
COLOR2
Adjusting the image
NOTE:
For each menu items description, see “PICTURE
Menu” on page 31.
The screen will be cleared after 7 seconds without
any operation.
Switching off the projector automatically
240MIN.
210MIN.
180MIN.
150MIN.
OFF
60MIN.
90MIN.
120MIN.
Loading a saved setting
NOTE:
If you have not saved any settings, MEMORY1 - 5
will not be displayed.
PT-AE1000U.book Page 25 Monday, October 16, 2006 1:40 PM