Troubleshooting (basic) – Panasonic CF-31 User Manual

Page 23

Advertising
background image

23

Troubleshooting

Troubleshooting (Basic)

Follow.the.instructions.below.when.a.problem.has.occurred..There.is.also.an.advanced.troubleshooting.guide.in.the.

“Reference.Manual”..For.a.software.problem,.refer.to.the.software’s.instruction.manual..If.the.problem.persists,.contact.

Panasonic.Technical.Support.(è.page.35)..You.can.also.check.the.computer’s.status.in.the.PC.Information.Viewer..

(è.

.Reference Manual “Troubleshooting.(Advanced)”).

n

Starting Up

Cannot.start.up.

The.power.indicator.or.bat-

tery.indicator.is.not.lit.

l

. Connect.the.AC.adaptor.

l

. Insert.a.fully.charged.battery.

l

. Remove.the.battery.pack.and.the.AC.adaptor,.then.connect.them.again..

l

. If.a.device.is.connected.to.the.USB.port,.disconnect.the.device,.or.set.[USB.Port].or.

[Legacy.USB.Support].to.[Disable].in.the.[Advanced].menu.of.the.Setup.Utility.

l

. If.a.device.is.connected.to.the.ExpressCard.slot,.disconnect.the.device,.or.set.

[ExpressCard.Slot].to.[Disable].in.the.[Advanced].menu.of.the.Setup.Utility.

l

. Press

.

Fn

.

+

.

F8

.

to.turn.off.the.concealed.mode.

The.power.is.turned.on.but.

“Warming.up.the.system.(up.

to.32.minutes)”.appears.

l

. The.computer.is.warming.up.before.start.up..Wait.for.the.computer.to.start.up.(takes.

up.to.32.minutes)..If,.“Cannot.warm.up.the.system”.is.displayed,.the.computer.failed.to.

warm.up.and.will.not.start..In.this.case,.turn.off.the.computer,.leave.it.in.an.environment.

of.5.°C.{41.°F}.or.higher.temperature.for.about.an.hour,.and.then.turn.on.the.power.

again.

Cannot.turn.on.the.computer.

The.computer.does.not.re-

sume.from.sleep

(

)/standby..

(

).

(The.power.indicator.blinks.

quickly.in.green.)

l

. Leave.it.in.an.environment.of.5.°C.{41.°F}.or.higher.temperature.for.about.an.hour,.then.

turn.on.the.power.again.

After.adding.or.changing.

the.RAM.module,.the.power.

is.turned.on.but.nothing.is.

displayed.on.the.screen.

l

Turn off the computer and remove the RAM module, then confirm whether the RAM

module has compliant to specification. When the RAM module has conformed to specifi-

cation,.install.it.again.

The.computer.does.not.

enter.sleep.mode.while.the.

screen.saver.is.running..(The.

screen.stays.black.)

l

. Slide.and.hold.the.power.switch.for.four.seconds.or.longer.to.shut.down.the.computer.

forcibly..(Data.not.saved.will.be.lost.).Then.disable.the.screen.saver.

You.have.forgotten.the.pass-

word.

l

. Supervisor.Password.or.User.Password:.Contact.Panasonic.Technical.Support..

(è.page.35).

l

. Administrator.password:.

Ÿ

. If.you.have.a.password.reset.disk,.you.can.reset.the.administrator.password..Set.the.

disk.and.enter.any.wrong.password,.then.follow.the.on-screen.instructions.and.set.a.

new.password.

Ÿ

. If.you.do.not.have.a.password.reset.disk,.reinstall.(è.page.21).and.set.up.Windows,.

and.then.set.a.new.password.

“Remove.disks.or.other.

media..Press.any.key.to.

restart”.or.a.similar.message.

appears.

l

A floppy disk is in the drive (optional) and it does not contain system startup information.

Remove the floppy disk and press any key.

l

. If.a.device.is.connected.to.the.USB.port,.disconnect.the.device,.or.set.[USB.Port].or.

[Legacy.USB.Support].to.[Disable].in.the.[Advanced].menu.of.the.Setup.Utility.

l

. If.a.device.is.connected.to.the.ExpressCard.slot,.disconnect.the.device,.or.set.

[ExpressCard.Slot].to.[Disable].in.the.[Advanced].menu.of.the.Setup.Utility.

l

. If.the.problem.persists.after.removing.the.disk,.it.may.be.a.hard.disk.failure..Contact.

Panasonic.Technical.Support.(è.page.35).

Windows.startup.and.opera-

tion.is.slow.

l

. Press.

F9

.in.the.Setup.Utility.(è. .Reference Manual.“Setup.Utility”).to.return.the.

Setup.Utility.settings.(excluding.the.passwords).to.the.default.values..Start.the.Setup.

Utility.and.make.the.settings.again..(Note.that.the.processing.speed.depends.on.the.ap-

plication.software,.so.this.procedure.may.not.make.Windows.faster.)

l

. If.you.installed.a.resident.software.after.purchase,.turn.off.the.residence.

l

.

.Disable.Indexing.Service.in.the.following.menu..

Click.[start].-.[Search].-.[Change.preferences].-.[With.Indexing.Service.(for.faster.local.

service)].

DFQW5516ZAT_CF-31mk2_XP7_OI_M.in23 23

2011/04/27 10:57:29

Advertising