Printronix Network Interface Card - Manual (Page 174)

Chapter 7 Novell NIC Configuration (10/100Base-T)
174
Removing Preferred File Server
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a User ID and password first, type in root
for the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the Novell section and remove the name of the
preferred file server from the File Server field.
4. Click SUBMIT when done and physically repower the print
server to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password first, type in root
for the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell fserver del fservername
where fservername is the name of the Novell file server you
want to remove as a preferred file server.
4. Reset the unit to ensure the changes take effect.
reset