Printronix Network Interface Card - Manual (Page 315)

Store Commands
315
store pserver tcpsocket add <tcp-port> dest <dest>
Example: store pserver tcpsocket add 9101 dest d2prn
Maps the port number to a destination.
store pserver tcpsocket del <tcp-port> dest <dest>
Example: store pserver tcpsocket del 9101 dest d2prn
Deletes a mapped port number destination already defined by
listed commands.
ADAPTER,
WLAN
ADAPTER
store pserver novell passwd [<password>]
Example: store pserver novell passwd ptnx
Store the password (<password>) for the NIC to use when
logging in to a Novell file server. This password would have to
match one set on the file server.
ADAPTER,
WLAN
ADAPTER
store pserver novell frametype [ethernet2|802.2|802.3|
802.2snap|autosense]
Sets the frame type for the Novell protocol.
ADAPTER,
WLAN
ADAPTER
store pserver novell mode [auto|bindery|nds]
Example: store pserver novell mode [auto|bindery|nds]
Stores the mode for the unit to operate in either autosense,
Bindery, or NDS.
ADAPTER,
WLAN
ADAPTER
store pserver novell context [<context>]
Example: store pserver novell context context
Stores the print server object in any context within the NDS tree
choosen.
ADAPTER,
WLAN
ADAPTER
store pserver novell tree [<tree>]
Example: store pserver novell tree tree
Stores the print server object in a specified tree.
ADAPTER,
WLAN
ADAPTER
store pserver novell fserver add|del <fileserver>
Example: store pserver novell fserver add fs1
Add or remove a server entry on the NIC for the Novell file
server it will be servicing.