Pioneer RCS-LX60D - Manual (Page 82)

Recording 06
82
En
Changing D.TV audio languages
• Press to display the current audio
language. Press repeatedly to change it to other
available languages.
Changing D.TV subtitle languages
• Press to display the current subtitle
language. Press repeatedly to change it to other
available languages.
Using the MHEG application
(UK only)
Some stations bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience D.TV interactively. 1
The channel banner displays an icon ( ) to indicate that
the MHEG application can be run.
• Press to start the MHEG application. 2
• You can also use any of the colour buttons.
• Press TEXT to quit the MHEG application.
Viewing Teletext
(European countries except the UK.)
You can view the Teletext that comes simultaneously with
certain programmes.
• Press to display the Teletext.
• You can also use any of the colour buttons.
• Press the TEXT button again to hide the Teletext
screen.
Changing A.TV audio channels
You can change the audio channel of the broadcast or
external input signal.
• Press to change the audio type.
The current audio channel is displayed on-screen.
• If the NICAM audio setting (see NICAM Select on
page 140) is set to NICAM and you are watching a
NICAM broadcast, you can switch between NICAM
and Regular (non-NICAM) audio.
• If the NICAM broadcast is bilingual, you can also
select the language.
• You can also select the language for a non-NICAM
bilingual broadcast.
• When watching a recording made from an external
input with Bilingual recording selected (see External
Audio on page 140), you can switch the audio
channel between left ( L ), right ( R ) or both ( L+R ).
Note
• When recording to the HDD with HDD Recording
Format set to Video Mode On, to DVD-R/-RW (Video
mode), to DVD+R/+RW, or on the
LPCM setting, only
one channel of a bilingual broadcast is recorded. In
this case, decide which language you want to record
before recording by setting the Bilingual Recording
setting (see
Bilingual Recording on page 140).
Switching between TV and DVD
When the recorder is stopped or recording you can
choose whether to have the audio/video from the built-in
TV tuner (or external input) play on your TV (‘DVD mode’),
or watch the channel that the TV is currently set to (‘TV
mode’).
During playback or when a menu is being displayed on-
screen, the sound and video is always routed to your TV
and is unaffected by the
TV/DVD mode setting.
Note that the recorder must be connected to your TV
using a SCART cable to be able to use this feature.
• Switch between TV mode and DVD
mode.
Note
1 If you start recording while the MHEG application is running, the MHEG application screen will also be recorded. To avoid this, quit the
application first, then start recording. It is not possible to start the MHEG application while recording is in progress.
2 This function is not available when subtitle display is active.
SUB MAIN
+
AUDIO
SUB MAIN
+
SUBTITLE
SUB MAIN
+
TEXT
SUB MAIN
+
TEXT
SUB MAIN
+
AUDIO
NICAM
Regular
NICAM A NICAM B
Regular NICAM A+B
A (L) B (R)
A + B (L+R)
L R
L+R
SUB MAIN
+
TV/DVD
DVRLX60D_WV_EN.book 82 ページ ２００７年４月２４日 火曜日 午後７時５８分