Panasonic WV-BM1790 - Manual (Page 4)

4
The Panasonic Video Monitor WV-BM1790 reproduces
sharp black and white images on a 16-inch diagonal
screen, designed primarily for industrial applications, and
accepts standard CCIR/EIA input signals.
PREFACE
• Refer all work related to the installation of this prod-
uct to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm (2 inches) away from the wall.
• Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service
personnel for service.
• Do not attempt to disassemble the equipment.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
• Handle the appliance with care.
Do not strike or shake it, as this may damage the
equipment .
• Do not expose the equipment to water or moisture,
nor try to operate it in wet areas.
Take immediate action if the equipment becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personnel. Moisture may damage the equipment
and also cause electric shock.
• Do not use strong or abrasive detergents when
cleaning the equipment body.
Use a dry cloth to clean the equipment when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently. Afterwards, wipe off the remained part
of the detergent in it with a dry cloth.
• Do not operate the equipment beyond its specified
temperature, humidity or power source ratings.
Use the equipment at temperatures within –10˚C -
+50˚C (14˚F - 122˚F) and a humidity below 90 %.
The input power source for this equipment is 120 V AC
60 Hz.
PRECAUTIONS
FEATURES
• 413 mm (16-1/4 inches) diagonal viewing size.
• Horizontal resolution of 1 000 lines at the center.
• Looped through BNC connectors for video input and
output.
• Accepts multi-standard (CCIR or EIA) input
• Can be mounted into the optional rack with the WQ-
LM170E rack mounting bracket.