Philips 20FT3310/37 User Manual

Page 7

Advertising
background image

- 7 -

In this sub menu, the Control settings of the TV can be configured.














In this sub menu, the Close Caption and V -Chip settings of the TV can be configured.

•

ESP: Energy Saving Programmability Mode
(ESP) controls the maximum continuous viewing
time allowed by the control system. The ESP
Menu function is shown as "ESP", and its valid
values are 00 - 99 (in hours). 00 value means
OFF.

•

Audio/Video Mute: The Audio/Video Mute
menu function determines whether the video
should be blanked and the audio muted, if the
currently tuned channel has no signal.

•

Source Menu Item: Toggle between
“YES/NO” to enable or disable selection of the
TV Source Input via the guest Setup menu when
using the guest Remote Control.

•

Save CC: This menu item sets the option of
saving the Close Caption selection to “Yes” or
“No”.

•

CC: This menu item allows selection of Close
Caption channels, or to turn Close Caption
“OFF”.

•

Saved V -Chip: This menu item sets the option of
saving the V-Chip selection to “Yes” or “No”.

•

V-Chip Menu Item: This menu item sets the
option of toggling the V -Chip Menu Item to
“Yes” or “No”.

•

V-Chip Setup: This sub-menu allows the setting
and disabling of Movie and TV ratings for the V-
Chip.

•

Channel Guide: Select “YES” to allow the Channel Guide Menu to be displayed if the “Channel Guide” button
is pressed on the guest Remote Control. Select “NO” to disable this feature.

•

Min Volume: This item sets the limit for minimum volume allowed for the television set. Use the Right/Left
cursor buttons to adjust.

•

Max Volume: This item sets the limit for the maximum volume allowed for the television set. Use the
Right/Left cursor buttons to adjust.

•

Audio Out Volume: Set the volume of the external audio output (e.g. bathroom speaker). This volume is
independent of the main speaker volume level. (*Note: Available on certain models only).

Advertising