Philips CD245 - Manual (Page 27)

Use more of your phone 25
Tip
Press
p
key on the base station again
to stop paging.
5.10 Chain Dialling
This feature allows you to dial an
extension to a number already saved in the
phonebook during a call.
Press
r
to take the line and press
m
to open phonebook list.
• The phonebook entries are listed in
alphabetical order.
Scroll
:
to select an entry and
press
m
OK .
• The first part is dialled.
Enter the extension.
• Each digit blinks to indicate dial out.
5.11 Clock and Alarm settings
This feature allows you to set the date,
time and alarm settings for your phone.
The default date and time is
01/01 and
00:00 respectively.
5.11.1 Set Date and Time
Press
m
in idle mode, scroll
:
to
CLOCK/ALARM and press
m
OK ,
press
m
OK to enter DATE &
TIME .
The last stored date is displayed.
Enter the current date (DD/MM)
and press
m
OK .
The last stored time is displayed.
Enter the current time (HH:MM) and
press
m
OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
Tip
Press and hold
p
key in idle mode to
switch between handset name and time/
date display mode.
Note
Enter the date in Day/Month format and
the time in 24-hour format.
An error tone will be emitted if an invalid
digit is entered in the date/time fields.
Hour: 00 to 23; Minute: 00 to 59
Date: 01 to 31; Month: 01 to 12
Warning
If your phone is connected to an ISDN
line through an adaptor, the date & time
may be updated after each call. The
availability of date & time update is
dependent on your network provider.
Please check the date & time settings in
your ISDN system or contact your
network provider.
5.11.2 Set Alarm
Press
m
in idle mode, scroll
:
to
CLOCK/ALARM and press
m
OK ,
scroll
:
to SET ALARM and press
m
OK .
Scroll
:
to OFF , ON ONCE or ON
DAILY and press
m
OK .
If you select ON ONCE or ON
DAILY , enter the time (HH:MM) for
the alarm and press
m
OK to
confirm.
• A validation tone is emitted and the
screen returns to previous menu.
1
2
3
1
2
3
!
1
2
3