Philips CD245 - Manual (Page 35)

Advanced settings 33
Note
The default pin code is preset to 0000. If
you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN
code.
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to PIN and press
m
OK .
Enter the current Master PIN when
prompted and press
m
OK to
confirm.
• The PIN entered will be shown as
asterisks (*) on the screen.
Enter the new PIN and press
m
OK
to confirm PIN change.
Tip
If you forget your PIN, you will need to
reset your phone to its default settings.
See next section “Reset Unit” for more
details.
7.10 Reset Unit
You can reset your phone to its default
settings with this feature.
Warning
Upon reset, all your personal settings, call
log and redial list entries will be deleted
and the phone will return to its default
settings. However, your phonebook will
remain unchanged after reset.
Note
You may have to configure your phone
once again. In this case the WELCOME
mode will appear again after master reset.
(go to chapter 3.3)
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to RESET UNIT
and press
m
OK .
CONFIRM? is displayed on the
screen.
Press
m
OK again to confirm.
• A validation tone is emitted.
• The unit is reset to its default
settings. (see “Default settings” on
page 34)
7.11 Country Selection
The availability of this menu is dependent
on your country.
You can select another country different
from the one chosen during WELCOME
mode.
Note
Once the country is selected, the default
line settings for the selected country will
be applied to the phone automatically
(e.g. Recall time, Dial mode, Language,
etc).
Press
m
key in idle mode, scroll
:
to ADVANCE SET and press
m
OK , scroll
:
to SEL.
COUNTRY and press
m
OK .
Scroll
:
to the country of your
choice and press
m
OK .
CONFIRM? is displayed on the
screen.
Press
m
OK again to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
1
2
3
!
1
2
3
1
2
3