How to use the elliptical exerciser – NordicTrack VGR 850 User Manual

Page 10

Advertising
background image

10

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER

To mount the elliptical exerciser, firmly hold the han-
dlebars or the pulse grips and carefully step onto the
pedal that is in the lowest position. Next, step onto the
other pedal. Push the pedals until they begin to move
with a continuous motion. Note: The pedal disks can
turn in either direction; it is recommended that
you turn the pedal disks in the direction shown
below; however, to give variety to your exercise,
you may choose to turn the pedal disks in the
opposite direction.

To dismount the elliptical exerciser, allow the pedals
to come to a complete stop. CAUTION: The elliptical
exerciser does not have a freewheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the highest
pedal first. Then, step off the lowest pedal.

HOW TO ADJUST THE RESISTANCE OF THE
PEDALS

As you exercise,
you can adjust
the resistance of
the pedals with
the resistance
knob on the
Upright. To
increase the
resistance,
turn the knob
clockwise; to
decrease the
resistance, turn the knob counterclockwise.

Pedal

Pedal Disk

Resistance

Knob

Advertising