Nikon HMSM4050 - Manual (Page 3)

3
Installation Overview
Your package contains the following:
Wireless
Motion
Sensor
Wall
Moounting
Bracket
Hardware
Mounting
Kit
Batteries
Installing your sensor is a simple process.
1
Twist the WMS clockwise at the seam in the middle and pull the two halves apart.
2
Insert batteries.
Register your sensor with your Wireless System Controller using a process called Discovery. Refer
3
to your
ockwise until it clicks. Line up the vertical seams so the wall mounting
.
5
ount the sensor.
Feature Locator
homesight Software User Guide for instructions on how to discover your Wireless Motion Sensor.
4
Reassmble the halves tightening countercl
bracket (if used) will attach correctly
M
1 2
AA
AA
Discovery Button
Battery
installation