Nikon AF-S NIKKOR 200-400mm f/4G ED VR II 2187 - Manual (Page 23)

23
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
be taken when performing memory recall at longer focal length settings.
When the sound monitor switch is set to , it will beep a warning. It is
recommended to perform memory recall as often as possible at the same
focal length to which the memory has been set.
2 Set the focus operation selection switch to MEMORY RECALL.
3 Press a focus operation button. After the lens beeps twice, fully press the
shutter release button to take the picture.
• The saved focus distance is recalled when a focus operation button is pressed
even when the shutter release button is pressed halfway.
• To take pictures at the saved focus distance, hold the focus operation button
down and fully press the shutter release button.
• The lens reverts from memory recall to autofocus or manual focus when the
focus operation button is released.
Autofocus (AF) start on the lens (AF-ON)
1 Set the focus mode switch to A/M or M/A.
2 Set the focus operation selection switch to AF-ON.
3 Press a focus operation button to focus on the subject.
• Autofocus is activated while a focus operation button is pressed and held down.
• The AF-ON function can be engaged either from the camera or from the lens.
■ Vibration reduction mode (VR )
Basic concept of vibration reduction
Strength of vibrations Strong Weak
Set the vibration reduction
mode switch to NORMAL.
Panning shots
Camera shake
Camera shake when using a tripod
Set the vibration reduction
mode switch to ACTIVE.
Number of vibr
ations
Low
High
Strong
camera shake when
taking pictures
from a moving
vehicle
When taking pictures
When taking panning shots
When taking pictures from
a moving vehicle
When taking pictures using
a tripod Set the vibration reduction mode switch to either NORMAL or ACTIVE.
Set the vibration reduction mode switch to NORMAL.
Set the vibration reduction mode switch to ACTIVE.
Set the vibration reduction mode switch to either NORMAL or ACTIVE.