Nokia XPRESS-ON 3125 - Manual (Page 36)

M e s s a g e s ( M e n u 1 )
26 Copyright © 2004 Nokia. All rights reserved.
Call and setup your voice
mail
1. Once you have saved the voice
mailbox number, press and hold
the 1 key.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the service’s
automated instructions to setup
your voice mail.
Listen to your voice
messages
Once you have setup voice mail, you
can dial the voice mailbox number in
one of four ways:
• Dial the voice mailbox number
using the keypad.
• Press and hold the 1 key.
• Press Listen if there is a
notification message in the
display.
• At the standby mode, select
Menu > Messages > Voice
messages > Listen to voice
messages .
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.
Clear voicemail icon
To clear the new voicemail icon from
the standby mode, select
Menu >
Messages > Voice messages > Clear
voice mail icon .
Automate voice mail
You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dialling
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, press # key.