Insert dialling codes, Setup voice mail with dialling codes, Minibrowser messages – Nokia XPRESS-ON 3125 User Manual
Page 37
Copyright © 2004 Nokia. All rights reserved.
27
M e s s a g e s ( M e n u 1 )
Be precise; you will need this
information in
Insert dialling codes
Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
+—International dialling access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the Talk
key before sending the numbers or
codes that follow.
Setup voice mail with dialling
codes
1. At the standby mode, select
Contacts
>
Speed dials
.
2. Scroll to an empty speed dialling
slot and press
Assign
.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press
OK
.
6. Enter a name (such as Voice
Mail), and press
OK
.
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key at the standby mode.
Note: If Speed dialling is off,
the phone displays a prompt
asking if you would like to
turn on speed dialling.
■ Minibrowser messages
Minibrowser messaging is a network
service. See
for
more information.
If your wireless service provider
supports this feature, you can check
for e-mail messages using the
minibrowser. At the standby mode,
select
Menu
>
Messages
>
Minibrowser messages
, and press
Connect
.
for
more information on using the
minibrowser in your phone to access
web pages.