NordicTrack ViewPoint NTL11806.1 - Manual (Page 13)

13
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the
75 ohm terminal on
the treadmill frame
near uprights.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the
video output jack on your external source.
2. Plug in the power cord of your external source. See
your external source’s user’s manual for proper
grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm ter-
minal on the treadmill frame near the uprights.
HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK
Plug one end of an audio/video wire into your DVD
player or VCR, and plug the other end into the
audio/video input jack on the back of the console.
HOW TO CONNECT A PERSONAL AUDIO/VIDEO
PLAYER DIRECTLY TO THE CONSOLE
Locate the audio/video plug below the television on the
console, and plug it into a jack on your MP3 player, CD
player, or other personal audio/video player.
75 Ohm Terminal
75 Ohm CATV Cable
Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
treadmill; a VCR or DVD player to the audio/video input jack; or a personal audio/video player to the
audio/video jack below the television on the console. Note: Use a CATV cable to connect to an external
source such as a cable box, analog cable, satellite TV box, or VCR. No CATV cable or audio/video wire is in-
cluded.