Network Technologies MAN027 - Manual (Page 5)

3
INSTALLATION
1. It is not necessary to turn OFF power to either of the CPUs that will be connected to the UNIMUX-USBV-2 USB KVM switch
before connecting or disconnecting any cables.
NOTE: If a CPU needs to identify a keyboard, it will be necessary to power ON the CPU after it is connected to the
UNIMUX-USBV-2 USB KVM switch and only after the keyboard is connected and the UNIMUX-USBV-2 USB KVM
switch is powered ON.
2. Connect a USB keyboard to a female USB type A port labeled "USB DEVICES" on the UNIMUX-USBV-2 USB KVM switch.
See Fig. 1.
3.
Connect a USB mouse to the other female USB type A port labeled "USB DEVICES" on the UNIMUX-USBV-2 USB KVM
switch.
4.
Connect a VGA multi-scan monitor to the female 15HD VGA port labeled "MONITOR" on the UNIMUX-USBV-2 USB KVM
switch. Be sure to tighten the two screws on the monitor cable connector to the UNIMUX-USBV-2 USB KVM switch
securely.
Fig. 1
INSTALLATION
-
+
U S B K e y b o a r d
U S B
M o u s e
U S B T y p e A
M a l e C o n n e c t o r s
V G A
M u l t i - S c a n
M o n i t o r
U S B T y p e A m a l e
5 V D C
A d a p t e r
A C
A D A P T E R
B a r r e l
( I n s i d e
b a r r e l )
( O u t s i d e
b a r r e l )
P o w e r C o n n e c t o r
2 . 1 m m x 5 . 5 m m F e m a l e
5 V D C @ 2 . 0 A O U T P U T
1 5 H D m a l e
V i d e o C o n n e c t o r
U N I M U X
N T I
R
N e t w o r k T e c h n o l o g i e s I n c