NEC P/N 1093099 - Manual (Page 97)

Hold
DSX Feature Handbook Features ◆ 89
Features
b.
If the extension that placed the call on Hold has a programmed name:
Hold Recall
300: Attendant
To pick up an outside call on Exclusive Hold:
1.
Press the flashing line key.
• The line key lights solid (green).
Using Intercom Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an Intercom call on Hold:
1. Press HOLD .
• INTERCOM flashes with a double-wink (on green) while on Hold - slow flash (green) while recalling.
To pick up an Intercom call from Hold:
1. Lift the handset
2. If you are not connected to the Intercom call, press INTERCOM .
Using Hold at a Single Line Telephone
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an outside or Intercom call on Exclusive Hold:
• Single line telephones cannot place calls on System Hold.
1. Hookflash.
2. Dial *7 and hang up.
• If you leave the call on Hold too long, it will recall to you.
• If you hookflash and hang up without dialing
*7 , the call will recall immediately.
• If you have a call on Exclusive Hold and have a Camped-On call waiting, dialing *7 will answer the waiting
call. See Split (Alternate) (page 154) for more.
To retrieve your call from Exclusive Hold:
1. Lift the handset and dial *7 .
To pick up an outside call on system Hold at a co-worker’s extension:
• You must know the number of the line that is on Hold.
1. Lift the handset and dial *4 .
2. Dial *4 .
3.
Dial the number of the line that is on Hold.
• For example, dial 01 for line 1.
Using Exclusive Hold
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]