NEC DTerm Series 80 User Manual
I p k ii, Nec dterm series 80 telephone user guide
NEC DTerm Series 80
TELEPHONE USER GUIDE
I P K II
To Place an Outgoing Call Page 6
•
Lift handset or press
Speaker
•
Dial “9” or press a Line Key.
To Place an Intercom Call Page 9
•
Lift handset or press
Speaker.
•
Dial Extension number or One-Touch key.
•
For privacy press “1” after the Extension or
One-Touch key to make phone ring.
To Place a Call on Hold Page 10
•
With the caller on the line, press
Hold.
Call Transfer
Page 10
•
While call is in progress, press
Transfer
•
Dial Extension, press One-Touch key or
dial
9 + number
for off-site transfer
•
Announce call, if desired, hang up
Microphone Key Page 9
•
Indicates whether calling party can hear you
Answer Key Page 5
•
While you are on a call, press
Answer
the
current caller on hold and automatically
connect to the incoming call.
•
This does not work on PRI or T-1.
Redial Key Page 19
•
Press
Redial
until desired number appears
in the display, then lift the handset.
Group Listening Page 9
•
While on a handset call press
Speaker
twice. The conversation is now heard over
the speaker.
Conference Calling Page 11
•
While call is in progress, press
Conf.
•
Dial number of 3
rd
party.
•
Receive answer, then press
Conf
twice.
•
Repeat to add more parties.
Call Park Page 12
•
While call is in progress, press
Transfer
then press
Park
and dial zone
01
to
64.
•
Page party with zone that you parked call.
•
To pick up the call, lift the handset and
press
Pick Up
and dial zone (
01
to
64
)
that was announced.
Paging
Page 22
•
Lift handset and press
Page
or
•
Lift handset and dial following codes
•
Internal All
7010
•
External All
7030
•
Internal and External All
*10
Do Not Disturb
•
Press
DND
or lift handset & dial
747
•
Dial
3
to block all calls.
•
Dial
0
to cancel.
Call Forward Page 24
•
Press
Call Fwd
or dial
741
•
Dial
1
,
then
d
ial extension or
9
+ phone
number for off-premise, then hang up.
•
To cancel, press
Call Fwd
or dial
741
•
Dial
0
Program DSS Buttons Page 36
•
Lift handset and dial
751
•
Press key to be programmed.
•
Dial
01
+ extension,
Hold
twice.
•
Dial
00
to clear key.
Downloaded from
manuals search engine