Using call park – Nortel Networks IP Phone 2001 User Manual
Page 37

While on an active call
37
If the transferred call is not answered, your telephone rings:
Using Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call
from any telephone. Using Call Park does not tie up a line and, when
configured network-wide, can be used across networks. A
System Park
Extension
can be configured to automatically park most calls.
or
3. Choose one of the following to start the
recall timer:
— Press the
Transfer
soft key again.
— Replace the handset before the
extension answers.
If the transfer is complete, the recall
timer stops.
1. Lift the handset to reconnect to the
original caller.
2. Choose one of the following:
— Press the
Transfer
soft key and
repeat the transfer (to a different
DN).
(Goodbye)
— If the transfer is picked up while you
are on the line, press the
Goodbye
key to complete the transfer.