NEC Express 5800/230Eh - Manual (Page 90)

4-26 Configuring Your Server
Console Redirection
The following screen appears if you select "Console Redirection" on the Server menu and press
Enter.
See the table below for the items.
Option Parameter Description Your Setting
BIOS Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the serial port to which a
remote console is connected.
ACPI Redirection
Port [Disabled]
Serial Port A
Serial Port B Specify the serial port to which an
ACPI console is connected.
Baud Rate 9600
[19.2k]
38.4k
57.6k
115.2k Specify the baud rate used for the
interface with successive remote
consoles.
Flow Control None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8 Specify the type of remote console.
Remote Console
Reset [Disabled]
Enabled Specify whether to enable or disable
the reset command issued from
remote console.
[ ]: Factory-set