35mm slr specifications – Nikon 35mm SLR User Manual

Page 2

Advertising
background image

FM3

A

35mm SLR Specifications:

1300 Walt Whitman Road, Melville, NY 11747

www.nikonusa.com / 1-800-Nikon-US

Type of camera:

Manual focus 35mm single-lens reflex

Picture format:

24mm x 36mm (standard 35mm film format)

Lens mount:

Nikon F mount; meter coupling lever provided; meter coupling lever release button not provided

Compatible lenses:

AI, AI-s, AF-D, AF-S, P -(except IX and G-type Nikkor lenses)

Exposure modes:

Aperture-Priority Auto; Manual

Viewfinder:

Eye-level pentaprism type; 0.80x magnification with 50mm lens set at infinity; finder coverage
approx. 93% of picture field

Focusing screen:

Split-image microprism type (Type K3) provided as standard; matte type (B3) and matte with horizontal
and vertical line etchings (E3) also available

Eyepoint magnification:

14mm at –1.0 m-1 (dpt.)

Viewfinder information:

Shutter speed exposure meter indication, ADR (aperture direct readout) f-number in use, exposure compensation
mark, and flash ready-light

Reflex mirror:

Automatic quick-return type incorporating special control gear and wheel mechanism for reduced mirror bounce;
non-lockable type

Metering system:

Through-the-lens (TTL) 60/40 center weighted full aperture exposure metering system using a pair of
SPDs (silicon photodiodes) and metering IC circuit

Metering range:

EV 1 to 20 at ISO 100 and with f/1.4 lens (i.e., from 1 sec. at f/1.4 to 1/4000 sec. at f/16)

Exposure meter coupling:

AI type

Exposure compensation:

Exposure compensated in ±2 EV range, in 1/3 steps

Auto exposure lock:

Detected exposure value locked by pressing AE-L button

Film speed setting:

DX: ISO 25 to 5000 with DX-coded film; manual: ISO 12 to 6400

Shutter:

Vertical-travel, metal, focal plane shutter with aluminum alloy curtains

Shutter release:

Electronically controlled in A mode and mechanically controlled in M mode; Center-threaded shutter release button
accepts AR-3 Cable Release; button locked when film advance lever is flush with camera body

Shutter speed range:

M Mode-1/4,000 sec. to 1 sec., B (Bulb), A Mode-1/4000 sec. to 8 sec. (stepless control) 14 discreet settings in all

Sync contact:

X-contact only; flash synchronization up to 1/250 sec.

Flash synchronization:

Built-in ISO-type hot-shoe; threaded sync cord terminal provided for off-camera or multi-flash photography;
synchronization with electronic flash units at speeds up to 1/250 sec.

Flash ready-light:

LED provided; visible inside viewfinder; lights up when SB-28/28DX, SB-27, SB-50DX, SB-22s, SB-16B or SB-29
Speedlight Unit used is fully charged; blinks to warn that the shutter speed set is beyond the electronic flash’s sync range
or for full output warning

Accessory shoe:

Standard ISO-type hot-shoe contact (sync contact, ready-light contact, TTL auto flash contact, monitor contact,
GND), safety lock hole provided

Self-timer:

Set/cancel mechanical type provided; approx. 4 to 10 sec. duration

Depth-of-field preview button:

Stops down lens aperture when pressed

Film advance:

Single-stroke type; 30 degree stand-off angle and 135 degree winding angle

Film rewind:

Manual via rewind crank

Motor drive coupling:

Electrical contact and coupler built in for operation with Motor Drive MD-12; the MD-12 is operable when film
advance lever is flush with camera body

Multiple exposure:

Provided; disengages frame counter for correct count

Power source:

Choice of one 3V CR-1/3N lithium battery, two 1.55V SR44 silver-oxide batteries, or two 1.5V LR44 alkaline batteries;
optional Anti-Cold Battery Holder DB-2 accepting two 1.5V LR6 (AA-type alkaline), 1.2V KR-AA (AA-type NiCd) or
1.5V R6 (AA-type manganese) batteries available

Exposure meter switch:

Lightly pressing the shutter release button switches meter on; meter stays on for approx. 16 sec. after finger leaves
button, then automatically switches off; meter automatically turned off when shutter speed dial is set to B

Camera back:

Pops open when the film rewind knob is pulled up; detachable and interchangeable with Data Back MF-16;
film cartridge confirmation window provided

Body finish:

Black or silver-color available

Dimensions (W x H x D):

142.5 x 90 x 58mm

Weight (without batteries):

Approx. 20.1 oz.

Product number:

1666 Chrome, 1667 Black

All specifications apply when two fresh SR44 or LR44 batteries are used at normal temperature (20°C - 68°F). For more complete specifications and compatibility information, refer to the
Nikon FM3

A

product brochure and/or the Nikon FM3

A

instruction manual. Specifications and design are subject to change without any notice or obligation on the part of the manufacturer.

© 2001 Nikon Inc.

Advertising