Chapter 3 wireless configuration, Considerations for a wireless network, Considerations for a wireless network -1 – NETGEAR DG834GV v2 User Manual
Page 25
Wireless Configuration
3-1
v1.0, September 2006
Chapter 3
Wireless Configuration
This chapter describes how to configure the wireless features of your Integrated ADSL Modem
and Wireless Router with Voice, Model DG834GV.
Considerations for a Wireless Network
In planning your wireless network, you should consider the level of security required. You should
also select the physical placement of your modem router in order to maximize the network speed.
To ensure proper compliance and compatibility between similar products in your area, the
operating channel and region must be set correctly.
Observe Performance, Placement, and Range Guidelines
The operating distance or range of your wireless connection can vary significantly based on the
physical placement of the wireless firewall. The latency, data throughput performance, and
notebook power consumption also vary depending on your configuration choices.
For best results, place your firewall:
•
Near the center of the area in which your computers will operate
•
In an elevated location such as a high shelf where the wirelessly connected computers have
line-of-sight access (even if through walls)
•
Away from sources of interference, such as computers, microwaves, and cordless phones
•
With the Antenna tight and in the upright position
•
Away from large metal surfaces
Note: Failure to follow these guidelines can result in significant performance degradation
or inability to wirelessly connect to the router. For complete range/performance
specifications, please see