Nortel Networks 1100 - Manual (Page 25)

Chapter 3 Configuring the telephone settings 25
IP Phone 1110 User Guide
Setting the ring type
1 Press Feature *6.
2 To hear the different ring types, press 1, 2, 3, 4, or Next.
3 To set the ring type, press OK.
Viewing and editing the call log
1 Press Feature 812.
2 To scroll through and edit the call log, use the navigation keys.
Note: Contact your system administrator to activate the call log feature.
Time offset
When your IP Phone 1110 is located in a different time zone than your system, the display shows
the system time instead of the local time. Use the Time Offset feature to adjust the time that
appears on the display. Before you begin, calculate the time difference, in hours, between the
server time and local time.
1 Press Feature *510.
2 Press Change.
3 To switch between adding or subtracting time, press *.
4 To enter the number of hours between local time and system time, use the dialpad.
5 To enter half-hour increments, press #.
6 Press OK.
It can take up to 1 minute for the change to appear on the display.