Headlight control switch, Fog light operation (if so equipped), High beam – NISSAN 2009 Altima Sedan User Manual

Page 6

Advertising
background image

HEADLIGHT AND TURN SIGNAL CONTROL

TO ACTIVATE THE AUTOLIGHT SYSTEM (if so
equipped):

Turn the headlight control switch

to the AUTO position

to activate the autolight system. The autolight system can:

Ⅲ Turn the headlights on automatically when it is dark.
Ⅲ Turn the headlights off automatically when it is light.
Ⅲ Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and all

doors are closed.

TO DEACTIVATE THE AUTOLIGHT SYSTEM:

Ⅲ Turn the headlight control switch

to the OFF ,

or

position.

HEADLIGHT CONTROL SWITCH

Ⅲ Turn the headlight control switch

to the

position to turn on the front parking,

tail, license plate and instrument panel lights.

Ⅲ Turn the headlight control switch

to the

position to turn on the headlights. All

other lights remain on.

FOG LIGHT OPERATION (if so equipped)

NOTE: The headlights must be on and the low beams

selected for the fog lights to

operate.

Ⅲ Turn the switch (inside collar)

to the

position to turn on the fog lights.

Ⅲ Turn the switch (inside collar)

to the OFF position to turn off the fog lights.

HIGH BEAM

Ⅲ Push the headlight control switch forward

to

select the high beam function. The blue

indica-

tor light illuminates. Pull the headlight switch back to
the original position to select the low beam. The

blue

indicator light goes off.

Ⅲ Pull and release the headlight control switch

to flash the headlight high beams on

and off.

4

Advertising
This manual is related to the following products: