Nikon MFX-1930 - Manual (Page 25)

4-11 Network Interface
4.5 Changing the default settings
The default settings offer the most common scan settings, please try using
these settings prior to adjustment.
Item Available setting Default setting
Document type Text, Photo&Text, Photo Text
Resolution 200, 300, 600 dpi 200 dpi
Contrast Lightest, Light, Normal, Dark,
Darkest
Normal
Auto reset time Auto reset timer: 1 to 10 minutes
Reset after scan: On, Off
3 minutes
Off
 Scan parameters
Set the default setting for document type, resolution, contrast and scan size.
1
Press [Menu], [2], [4], [1], [Enter]. The machine prompts you to select the
default document type setting.
Doc. Type:Text

/

/Enter
2
Use [ ] or [ ] to select the setting.
3
Press [Enter]. The machine prompts you to select the default resolution
setting.
Resolution :200dpi

/

/Enter
4
Use [ ] or [ ] to select the setting.
5
Press [Enter]. The machine prompts you to select the default contrast
setting.
Contrast :Normal

/

/Enter
6
Use [ ] or [ ] to select the setting.
7
Press [Enter] to save the settings.
To return to standby mode, press [Reset].