Napoleon Fireplaces NZ6000 - Manual (Page 20)

W415-0442 / A / 12.13.04
20
NZ64 BLOWER INSTALLATION
3. Connect the 6” collar to the blower opening located on
the side of the unit. An optional opening is covered on the
other side of the unit. If this location is preferred, switch the
cover plate and collar.
Secure by reaching through the collar and bending the
tabs.
Use sealant to ensure that the connection is air tight.
4. Electrical Connection
a) Remove the junction box covers on the unit and the
blower.
2. Position the blower to an inside or outside wall into a
framed opening 12
3 /
8
” wide by 10 1 /
2
” high.
The blower housing should be installed onto a level sur- The blower housing should be installed onto a level sur- The blower housing should be installed onto a level sur- The blower housing should be installed onto a level sur- The blower housing should be installed onto a level sur-
ffffface lar
ace lar ace lar ace lar ace larg g g g ge enough to suppor e enough to suppor e enough to suppor e enough to suppor e enough to support the b t the b t the b t the b t the blow low low low lower assemb er assemb er assemb er assemb er assembly ly ly ly ly.....
Allow for finishing material when securing the blower Allow for finishing material when securing the blower Allow for finishing material when securing the blower Allow for finishing material when securing the blower Allow for finishing material when securing the blower
housing, as the grill mounts to the housing.
housing, as the grill mounts to the housing. housing, as the grill mounts to the housing. housing, as the grill mounts to the housing. housing, as the grill mounts to the housing.
1. Remove the template.
This unit is supplied with a pressure switch and a ther- This unit is supplied with a pressure switch and a ther- This unit is supplied with a pressure switch and a ther- This unit is supplied with a pressure switch and a ther- This unit is supplied with a pressure switch and a ther-
mally activated switch. Ensure that the pressure switch
mally activated switch. Ensure that the pressure switch mally activated switch. Ensure that the pressure switch mally activated switch. Ensure that the pressure switch mally activated switch. Ensure that the pressure switch
actuating arm protrudes through the faceplate when in-
actuating arm protrudes through the faceplate when in- actuating arm protrudes through the faceplate when in- actuating arm protrudes through the faceplate when in- actuating arm protrudes through the faceplate when in-
stalled.
stalled. stalled. stalled. stalled.
The blower will only operate when the doors are fully
The blower will only operate when the doors are fully The blower will only operate when the doors are fully The blower will only operate when the doors are fully The blower will only operate when the doors are fully
closed.
closed. closed. closed. closed.