NAD 2200 - Manual (Page 5)

POWER AMP SECTION
Continuous output power into 8
Ω
* 100W (20dBW)
Rated distortion (THD 20Hz - 20kHz) 0.03%
Clipping power
(maximum continuous power per channel)
140W
IHF Dynamic headroom at 8
Ω
+6dB
IHF dynamic power (maximum short term power per channel) 8
Ω
400W (26dBW)
4
Ω
600W (28dBW)
2
Ω
800W (29dBW)
Damping factor (ref. 8 Ω , 50Hz) >100
Input impedance 25k
Ω
/ 1000pF
Input sensitivity (for rated power into 8 Ω ) 700mV
Frequency response 3Hz - 80kHz / +0, -3dBdB
Signal/noise ratio ref. 1W >91dB
ref. rated power >111dB
THD
(20Hz - 20kHz)
<0.03%
Bridged Mode
Continuous output power into 8
Ω
* 400W (26dBW)
IHF Dynamic headroom at 8
Ω
+5dB
IHF dynamic power (maximum short term power per channel) 8
Ω
1.2kW (31dBW)
4
Ω
1.6kW (32dBW)
PHYSICAL SPECIFICATIONS
Dimensions
(W x H x D) 420 x 123 x 370mm
Net weight 12.5kg
Shipping weight 14kg
Power consumption (120 ~ 240V, 50/60Hz) 770W
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE